Supra Mk5 A90/J29 (2019 -)

DIAGRAM REFERENCE: 20PRODUCT NOTES: PFF5-5452 Engine Mount Insertisa two-piece kit made using our Red65A durometer material, designed to fill the voiding of the OE rubber mount to limit drivetrain movement and sharpen throttle response on standard or...

DIAGRAM REFERENCE: 2PRODUCT NOTES: PFF5-5402 Front Lower Control Arm Inner Bush is made from our Black 95A durometer polyurethane and paired with CNC-machined plated steel outer shells and stainless-steel sleeve, to distribute load better and reduce...

DIAGRAM REFERENCE: 2PRODUCT NOTES: PFF5-5402G Front Lower Control Arm Inner Bush Camber Adjust is essentially the same as PFF5-5402 but with the addition of a stainless-steel adjusting sleeve and spanner. This allows for 0.5 of camber adjustment to the...

DIAGRAM REFERENCE: 1PRODUCT NOTES: PFF5-5401 ismade usingour Black 95A durometer material and supplied with anodised aluminium outer shells to increase bush stiffness by up to 300%, controlling longitudinal wheel movement under braking and cornering, and...

DIAGRAM REFERENCE: 1PRODUCT NOTES: PFF5-5401GBLK ismade usingour Black 95A durometer material and supplied with anodised aluminium outer shells to increase bush stiffness by 300%, controlling longitudinal wheel movement under braking and cornering, and...

DIAGRAM REFERENCE: 55PRODUCT NOTES: Designed with fast road driving in mind to replace the tear-prone soft rubber factory transmission mounts, a common cause of knocking, mis-shifting and over-revving. Fits RWD vehicles only. Made using CNC machined...

DIAGRAM REFERENCE: PRODUCT NOTES: PF5-4660 is a polyurethane jack pad to fit into the plastic lifting points found on most modern BMW and related vehicles and is designed to help lift stability and location, whilst protecting the underside of your...

DIAGRAM REFERENCE: 52PRODUCT NOTES: PFF5-5452BLKEngine Mount Insert uses the same design as the Road Series part but with our 95A Black Series material to provide uncompromisedengine stability. Mount rigidity is increased by a huge 180%.An increase...

DIAGRAM REFERENCE: 2PRODUCT NOTES: PFF5-5402 Front Lower Control Arm Inner Bush is made from our Black 95A durometer polyurethane and paired with CNC-machined plated steel outer shells and stainless-steel sleeve, to distribute load better and reduce...

DIAGRAM REFERENCE: 2PRODUCT NOTES: PFF5-5402G Front Lower Control Arm Inner Bush Camber Adjust is essentially the same as PFF5-5402 but with the addition of a stainless-steel adjusting sleeve and spanner. This allows for 0.5 of camber adjustment to the...

DIAGRAM REFERENCE: 1PRODUCT NOTES: PFF5-5401BLKismade usingour Black 95A durometer material and supplied with anodised aluminium outer shells to increase bush stiffness by 300%, controlling longitudinal wheel movement under braking and cornering, and...

DIAGRAM REFERENCE: 1PRODUCT NOTES: PFF5-5401GBLK ismade usingour Black 95A durometer material and supplied with anodised aluminium outer shells to increase bush stiffness by 300%, controlling longitudinal wheel movement under braking and cornering, and...